Micasense RedEdge-M Integration Kit for the DJI Inspire 1 Pro

This integration kit is designed to correctly position the MicaSense RedEdge-M® multispectral camera onto the DJI Inspire Pro 1 in order to optimize precision agriculture aerial surveys. The kit includes all the necessary mounting parts, hardware and adhesive pads to mount the camera, GPS antenna and Downwelling Light Sensor (DLS). It incorporates silicone damper mounting balls to isolate the camera from the drone body and eliminate vibration. The components are 3D printed.

This kit includes:

  • RedEdge-M mounting plate 
  • DJI Inspire 1 Pro base plate and clamping plate
  • 4 x anti-vibration silicone damping balls
  • Antenna mounting bracket
  • Antenna mast
  • Antenna fixing plate  
  • 3M VHB adhesive pads
  • Hardware set - all nuts, bolts and washers
  • Zip/Cable ties 

Fixing the kit is non-invasive and doesn't require any modification to the Inspire. The antenna mount replaces the vanity cover on the rear of the Inspire and uses the existing fixing bolts.

The antenna mast ensures the GPS antenna and DLS are clear of the propellers and there is no prop shadowing. It is a keyed, removable antenna mast. This ensures it is always oriented in the correct direction when mounted and is easily removable for packing. Make sure there is enough slack in cables.

In order to keep shipping costs down, the kit doesn't include a USB power source, but any suitable supply can be mounting on the back of the antenna mount. Check the Micasense RedEdge-M manual https://support.micasense.com/hc/en-us/article_attachments/115004168274/RedEdge-M_User_Manual.pdf for specs.

The  Anker 5000 Power Core https://www.anker.com/products/variant/powercore-5000/A1109011 is recommended. The antenna mount is sculpted to fit this and any flat power supply. It can be easily attached using the supplied zip ties. Make sure when choosing a supply that is properly clears the Inspire propellers in landing and in-flight configurations.

When attaching the parts, make sure not to over-tighten the nuts and bolts or the 3D printed parts may get damaged. Use thread lock 

Ensure the wires and cabling is not tight and doesn't impede the RedEdge camera mounting plate. Also make sure the cables are clear of the propellers and moving parts in landing and flight orientations.

The DJI Inspire 1 Pro, Anker power packs and Micasense RedEdge-M are not included.

Micasense RedEdge-M Integration Kit for the DJI Inspire 1 Pro

  • Product Code: RedEdge-M-Kit-Inspire-1
  • Availability: In Stock
  • £120.00


Related Products

Parrot Sequoia Integration Kit for the DJI Inspire 1 Pro

Parrot Sequoia Integration Kit for the DJI Inspire 1 Pro

This integration kit is designed to correctly position the Parrot Sequoia  multispectral camera..

£100.00

Micasense RedEdge-M Integration Kit DJI Matrice M200 M210

Micasense RedEdge-M Integration Kit DJI Matrice M200 M210

This integration kit is designed to correctly position the Micasense RedEdge-M® multispectral camera..

£100.00

Micasense RedEdge-MX Integration Kit for the DJI Inspire 1 Pro

Micasense RedEdge-MX Integration Kit for the DJI Inspire 1 Pro

This integration kit is designed to correctly position the MicaSense RedEdge-MX® multispectral camer..

£100.00

Tags: micasense, rededge-m, integration, kit, for, the, dji, inspire, pro, camera, mounts